This is a semi-Automatic Soldering System system with the top -frame suitable for holding PCB directly or mounted on the a separate carrier. The system incorporates a precision height adjustment and Dipping angle adjutment for precise soldering action, avoiding percentage rework and common soldering defects. This is a semi-Automatic Soldering System system with the top -frame suitable for holding PCB directly or mounted on the a separate carrier. The system incorporates a precision height adjustment and Dipping angle adjutment for precise soldering action, avoiding percentage rework and common soldering defects.

 
Is a fully adjustable rotary-wire stripper that processes solid- thin-film coated wire of any base material.
The stripper strips, polyurethene, polyamide, polYiJold, urea, solder and metal plating from the surface of the solid core/base metal wire, with ease and 100% efficiency.
The heart of the machine is a customised rotary chuck with Tungsten-carbide stripping jaws that can be adjusted for all wire diameters form 26 SWG to 8 SWG, and strip lengths from 2mm to 40mm.
The jaws/profiledlbeak-chuck allows stripping of wire ends on pre-wound bobins and coils with minimum clearances and depths.
Tool-life is doubled with the reversible motor powering the rotary chuck. Tool life in excess of two years between regrind is assured.
The stripping blades can be adjusted for all wire diameters and depth of stripping : from simple polishing of wire ends to material removal of of upto 50% of wire diameter.
Besides stripping the enamel coating, it can also be used to remove oxide deposits from component leads.
Power:200 watts , 220 AC
Drive:1440 RPM, Reversible Motor
Wire Dia. Capacity :SWG to 8SWG All solid film coatings
Stripped Length :3mm to 40mm
Dimensions (L x W x H) :(350 x 200 x 250) mm

Features:
It is suitable to be used as to various resistors, diodes, and other electronics components progress.
Cutting legs and bending can be finished at the same time, also the lead length and span can be adjusted as we needed.
It is low cost and won't be affected by the power supply.
It is suitable for mass production for the operation is to easy.
Low noise generation and rugged design.

soldering systems They meet the most exacting requirrnents of a soldering processes. They are. suitable for soldering single sided/PTH/multi-Iayered PCBs and the most intricate hybrid assemblies.
A precision digital temperature controller, a unique counter-balanced top loading frame and robust heaters (sealed cartridge type) form the heart of the machine, which is capable of two shift operation with a production rate of 60 soldering cycles / hr. A custom-designed loading frame and its movement during the soldering operation meets the kinematic and dynamic requirements of the process; avoiding the common soldering defect such as icicles, bridging, blowholes, etc
  This is a totally automatic system with its motorised drive and a 0-6 seconds timer for the movement of the PCB during the soldering opertion. The entire process is controlled by this motorised drive unit, making it independent of operator training and skills.

Is a fully adjustable rotary-wire stripper that processes solid- thin-film coated wire of any base material.
The stripper strips, polyurethene, polyamide, polYiJold, urea, solder and metal plating from the surface of the solid core/base metal wire, with ease and 100% efficiency.
The heart of the machine is a customised rotary chuck with Tungsten-carbide stripping jaws that can be adjusted for all wire diameters form 26 SWG to 8 SWG, and strip lengths from 2mm to 40mm.
The jaws/profiledlbeak-chuck allows stripping of wire ends on pre-wound bobins and coils with minimum clearances and depths.
Tool-life is doubled with the reversible motor powering the rotary chuck. Tool life in excess of two years between regrind is assured.
The stripping blades can be adjusted for all wire diameters and depth of stripping : from simple polishing of wire ends to material removal of of upto 50% of wire diameter.
Besides stripping the enamel coating, it can also be used to remove oxide deposits from component leads.
Power:200 watts , 220 AC
Drive:1440 RPM, Reversible Motor
Wire Dia. Capacity :SWG to 8SWG All solid film coatings
Stripped Length :3mm to 40mm
Dimensions (L x W x H) :(350 x 200 x 250) mm

Automatic Enamel wire coil soldering machinesoldering systems They meet the most exacting requirrnents of aU soldering processes. They are. suitable for soldering single sided/PTH/multi-Iayered PCBs and the most intricate hybrid assemblies.

Auto Taped capacitor lead trimmer Features:1.The machine is used exclusively taped single side resistor,capacitor,crystal and electronic parts cutting.2. It is suitable for roll or box packed material.3.Small size.Cutting accurately.Suitable for long and short foot processing.4.The motor can be variable speed without noiseSize(mm)520*380*300mm