Automatic Dip Soldering System
Our range of products include semi automatic dip soldering machine, foam fluxer with pre-heater and automatic wave soldering machine.Semi automatic dip soldering machine
Product Details:
| Minimum Order Quantity | 1 Piece |
| Machine Type | Automatic |
| Brand | Ravindra Electronics |
| Capacity | 30kg |
| Model Name/Number | DS011 |
| Output Current | 100-200 A |
| Temperature | 600c |
| Input Voltage | 230V |
| Condition | New |
| Warranty | ONE YEARS |
| Country of Origin | Made in India |
This is a semi-Automatic Soldering System system with the top -frame suitable for holding PCB directly or mounted on the a separate carrier. The system incorporates a precision height adjustment and Dipping angle adjutment for precise soldering action, avoiding percentage rework and common soldering defects. This is a semi-Automatic Soldering System system with the top -frame suitable for holding PCB directly or mounted on the a separate carrier. The system incorporates a precision height adjustment and Dipping angle adjutment for precise soldering action, avoiding percentage rework and common soldering defects.
Callback
Additional Information:
- Delivery Time: 5days
- Packaging Details: Cartoon box packing
Foam Fluxer With Pre-Heater
Product Details:
| Minimum Order Quantity | 1 Piece |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Machine Type | Semi-Automatic |
| Brand | Ravindra Electronics |
| Model Name/Number | -01 |
| Automation Grade | Automatic |
| Minimum Order Quantity | 1 |
| Output Current | 0-100 A |
| Temperature | 90-100 C |
Foam-Fluxer & Preheating Unit
This piece of equipment is used for fluxing and activating the fluxed PCB Assembly and preparing it for the soldering opertion.lt incorporates the following stages:
FORM-FlUXER; This generates a stable wave of foam (microscopic bubbles of flux) when air* is diffused and forced through the liquid-flux by a special device. The PCB assembly is passed over the foam-wave and the flux is applied on the lower side of the PCB.
AlR-KINFE : This is used to level off the flux applied by the foam -fluxer and blows off excess solvent from the flux on the PCB.
PRE-HEATER: This is used to activate the flux and bring the whole PCB assembly to a uniform temperature (around 90-100°C) to avoid thermal shock/stress when the assembly undergoes the solgering operation (control by Digital Temperature controler).
TRANSPORTATION: The PCB is conveyed through the above stages on a PCB carrier (2 Nos. Supplied with the equipment) moving on a pair of conveyor rail (manual movement). The carrier can then be transfered to the soldering station without removing the PCB form it.
Callback
Additional Information:
- Delivery Time: 5days
- Packaging Details: cartoon packing
Automatic Wave Soldering Machine
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | WSM-013 |
| Power Consumption | 5.5kw |
| Machine Type | Automatic |
| Input Voltage | 230V |
| Output Current | 300-400 A |
| Condition | New |
| Warranty | oneyear |
| Temperature | 300 |
| Country of Origin | Made in India |
| Brand | Ravindra Electronics |
Wave soldering systems Silent Features Stainless - Steel Foam Flux bath. Stainless - Steel long-life Foaming cartridge High efficiency convecto-Radiative pre-heater Extra long - life chain conveyor (6 mm, min section thickness) Submerged tube - in - tube sealed cartridge heaters Slide - out solder bath for easy cleaning. Gate-controlled wave-height control on finger tips. Solder drain-tap fitted wave pot. Digital PID controller for solder bath. Complete edge guided and finger type PCB holding rails. Natural Induced-draft exhaust. Wave width 200mm 310mm 360mm Solder Capacity 85Kg. 110Kg 140Kg Power Capacity 5.5kw 7.5kw 8.0kw
Callback
Additional Information:
- Item Code: 905678
- Delivery Time: 6days